GE DBVH520GJ Installation Instructions Manual page 11

REINSTALL NUTS AND HINGE COVER
14. Place the door on its edge. Assemble the 2 machine
screws (#8), washers, and nuts. Tighten using a
wrench and screwdriver.
15. Place the hinge cover in position. Align the hinge cover holes .
with the holes in the door.
16. Secure the hinge cover with the 2 tapping screws (#8).
Installation Instructions
REASSEMBLE DOOR ASSEMBLY
IMPORTANT: Make sure there is no dirt or any other foreign
material in between the window panes.
17. Place the plastic cover onto the inner door and lock
18. Place the outer door onto the inner door.
19. After reversing door, there will be a mismatch between the
11
in place with the 4 tabs.
Top of Door
outer door and the inner door.
Make sure that the handle part of the outer door is opposite
the hinge as shown.
Outer
Door
Inner
Door