Xerox 1235/DX - Phaser Color Laser Printer Network Manual page 12

Click OK. The Wizard will return you to the previous dialog.
11.
Verify that the port name you entered is in the list and is correct.
The check box to the left of the port name must be checked; if it is
not, check it, then select Next>.
12.
Insert your printer CD-ROM into your computer's CD-ROM drive
and click Have Disk.
13. Click the Browse button and select the directory containing the
Windows NT drivers (<CD Drive>:\instal\winnt40), then click
Open.
14. Select the *.INF file, then click OK.
15. The Wizard will return you to the previous dialog. Verify that the
path and file name are correct and click OK.
16. At the next dialog, enter a name for the printer and select whether
you want that printer to be the default, then click Next>.
17. If the printer will not be shared, click Next>. To share the printer,
enter a Share Name, check the share checkbox, then click Next>.
18. At the next dialog it is recommended that you print a Test Print.
Click Finish.
19. Wait for the Test Print to print. A new dialog will ask for
confirmation of the Test Print; click Yes.
20.
Send a print job to the printer.
21. Check the print job for print-quality. If print-quality problems
exist, use the print-quality section of your printer's Advanced
Features and Troubleshooting Manual to correct the problem.
22.
If your print job did not print, see the Troubleshooting section for
your operating system in the Technical Information Guide to
correct the problem.