Quick Install Steps (Tcp/Ip Protocol) - Windows 2000 Only - Xerox 1235/DX - Phaser Color Laser Printer Network Manual

Quick install steps (TCP/IP protocol) —
Windows 2000 only
1. At the Desktop, right-mouse-click the My Network Places icon
and select Properties.
2. Right-mouse-click the Local Area Connection icon inside the
Network and Dial-up Connections window. Select Properties.
3. Select the General tab and verify that Internet Protocol (TCP/IP)
is loaded.
4.
If the TCP/IP software is not present, install it using the
documentation provided by Microsoft. Then return to this
document.
5. Open the Control Panel and double-click the Printers icon.
6. Double-click Add Printer; the Add printer Wizard starts.
Click Next>.
7.
8. Click the Local Printer radio button.
9. Click Next>.
10. Click the Create a New Port radio button.
Select Standard TCP/IP Port from the New Port Type pull-down
11.
menu.
12. Click Next>.
13. The wizard now starts the TCP/IP port wizard, click Next>.
Click in the Printer Name or IP Address edit box, and type in the
14.
IP Address of the printer you wish to use.
15. Click Next>.
16. On the Confirmation window, click Finish if the data is correct. If
the data is not correct, click the <Back button to correct any
errors.
17. Insert your printer CD-ROM into your computer's CD-ROM drive
and click Have Disk.
Click the Browse button and select the directory containing the
18.
Windows 2000 drivers.
19. Select the *.INF file, then click Open.
20. The Wizard will return you to the previous dialog. Verify that the
path and filename are correct, and click OK.