3D Printing - Autodesk AUTOCAD 2010 - PREVIEW GUIDE Manual

AUTOCAD 2010 PREVIEW GUIDE
Figure 57.Auto-complete
Object Size Limits
In previous versions of AutoCAD, no single object in an AutoCAD drawing could be larger than 256 MB. In
AutoCAD 2010, the object size limit has been increased to at least 4 GB (depending on your system
configuration), providing more flexibility. These large objects, however, are not backwards-compatible, so a new
compatibility option has been added to the Open and Save tab of the Options dialog box.
Figure 58. Maintain drawing size compatibility
When the box is checked, object size limits from previous versions will be used instead of the new, expanded
limits.

3D Printing

The new 3D printing functionality in AutoCAD 2010 enables you to output your 3D AutoCAD drawings directly to
STL-supported 3D printing vendors through an internet connection. This simple utility will walk you through
www.autodesk.com/autocad http://heidihewett.blogs.com/
34