Panel Explanation; Front And Rear View For Vigor2700 - Draytek 2700 Series Quick Start Manual

1 . 1 P a n e l E x
1 . 1 P a n e l E x
1 . 1 . 1 F r o n t a
1 . 1 . 1 F r o n t a
LED
VPN
QoS
Firewall
ADSL2+
ACT (Activity)
LAN (1, 2, 3, 4)
Interface
PWR
ON/OFF
Factory Reset
ADSL 2+
LAN 4 – 1
p l a n a t i o n
p l a n a t i o n
n d R e a r V i e w f o
n d R e a r V i e w f o
Status
On
On
Off
On
Blinking
On (Green)
Blinking (Green)
Blinking (Orange)
On
Blinking
Orange
Green
Blinking
Description
Connecter for a power adapter with 12~15VDC.
Power Switch.
Restore the default settings.
Usage: Turn on the router (ACT LED is blinking). Press the hole and
keep for more than 5 seconds. When you see the ACT LED begins to
blink rapidly than usual, release the button. Then the router will restart
with the factory default configuration.
Connecter for accessing the Internet through ADSL2/2+.
Connecter for local networked devices.
r V i g o r 2 7 0 0
r V i g o r 2 7 0 0
Explanation
The VPN tunnel is launched.
The QoS function is active.
The QoS function is inactive.
The DoS function is enabled.
When encountered DoS attacks.
ADSL is show time.
The device starts handshaking.
The data is transmitting.
The router is powered on.
The router is powered on and running properly.
A normal 10Mbps connection is through its
corresponding port.
A normal 100Mbps connection is through its
corresponding port.
Ethernet packets are transmitting.
2
for Annex A
for Annex B