Table of Contents
Advertisement
3.4.3 PILOT Port CH 5
The used sentence Formatters are the same as before described at the ECDIS Port.
Note:
A pilot input/output port is part of an AIS Class A station. A plug connected to this port should
be installed on the bridge near the pilot's operating position so that a pilot can connect a
Personal Pilot Unit (PPU) if required. Also a power connector for the Pilot Unit should be
available nearby.
The pilot plug should be configured as follows: (Refer to SUB-COMMITTEE ON SAFETY OF
NAVIGATION NAV48/18 2.4.2002)
• AMP/Receptacle (Square Flanged (-1) or Free-Hanging (-2)), Shell size 11, 9-pin,
Std. Sex 206486-1/2 or equivalent with the following terminations:
- Tx A (out-) is connected to Pin 1
- Tx B (out+) is connected to Pin 4
- Rx A (in-) is connected to Pin 5
- Rx B (in+) is connected to Pin 6
- Shield is connected to Pin 9
3.4.4 LONG RANGE CH 8
The AIS long-range function requires a compatible long-range communication system (e.g.
Inmarsat-C or MF/HF radio as part of GMDSS) - a connection between this communication
system and the Class A mobile unit is possible.
This connection is required in order to activate the LR function of the AIS. Its input/output port
must meet the IEC 61162-2 requirements.
Sentence Formatters
UAIS Long Range Interrogation
LRI
LRF
UAIS Long-Range Function
LR1
UAIS Long-Range Reply Sentence l
LR2
UAIS Long-Range Reply Sentence 2
LR3
UAIS Long-Range Reply Sentence 3
Field Information:
All Fields are provided for Input and Output.
For detailed information please refer to
IEC 61993-2 / NMEA 0183 HS V3.0 for detailed field
information.
TM
GlobalWatch
UAIS Installation Manual
Direction
Input
Input / Output
Output
Output
Output
10
Y1-03-0177A
Version 1.0
Advertisement
Table of Contents
