Table of Contents
Advertisement
VMware vCenter AppSpeed User's Guide
View Thresholds and Monitoring Settings
You can view the thresholds and SLA monitoring settings.
Procedure
1
In the AppSpeed menu bar, click Inventory.
2
Double-click a service.
By default, the Summary view of the service appears.
3
In the View selection bar, click Thresholds.
The SLA Monitoring view appears.
4
If SLA Monitoring is enabled, you can view the monitored transactions.
A separate entry appears for each transaction.
SLA Monitoring
You can enable or disable SLA monitoring for each service or for each transaction. When disabled, thresholds
are not monitored and events are not generated for state changes.
Enable or Disable SLA Monitoring of a Service
n
If you enable SLA monitoring for a service, monitoring is enabled for the service and for all of its
transactions. If you disable SLA monitoring for a service, you cannot set SLA thresholds for its
transactions.
Enable or Disable SLA Monitoring of Transactions
n
You can enable or disable SLA monitoring for all transactions or for specific transactions. To monitor a
transaction, SLA monitoring must be enabled for the service to which it belongs.
Enable or Disable SLA Monitoring of a Service
If you enable SLA monitoring for a service, monitoring is enabled for the service and for all of its transactions.
If you disable SLA monitoring for a service, you cannot set SLA thresholds for its transactions.
You can configure AppSpeed to send email notifications regarding state changes. See
Email Notifications,"
Procedure
1
In the AppSpeed menu bar, click SLA & Events.
2
In the page selection bar, click Service Thresholds.
3
Click the On or Off button for the service for which you want to enable or disable monitoring.
Thresholds must be specified for the service, before you can enable monitoring.
4
(Optional) In the page selection bar, click Mail Notification Settings to configure AppSpeed to send email
notifications regarding state changes.
Enable or Disable SLA Monitoring of Transactions
You can enable or disable SLA monitoring for all transactions or for specific transactions. To monitor a
transaction, SLA monitoring must be enabled for the service to which it belongs.
Disabling SLA monitoring of a transaction does not remove saved threshold settings. However, the transaction
is no longer monitored for changes in performance levels based on those thresholds.
If SLA monitoring is disabled for a service, you cannot enable SLA monitoring of its transactions.
40
on page 43.
on page 40
on page 40
"Configure AppSpeed
VMware, Inc.
Advertisement
Table of Contents
