View Unmapped Traffic - VMware APPSPEED SERVER 1.5 Manual

View Unmapped Traffic

You can view the unmapped servers and transactions detected on the network. Unmapped objects are not yet
mapped to specific services. The number of unmapped objects typically decreases over time, as AppSpeed
maps the environment.
Prerequisites
To view unmapped traffic on HTTP sites that incorporate SSL protection, you must first configure the SSL keys
for each endpoint where AppSpeed detects SSL traffic. See
Procedure
1 In the AppSpeed menu bar, click Mapping.
2 In the page selection bar, click Unmapped.
3 View the status information for the unmapped traffic.
Server: Name of the server. Available on the Servers tab only.
n
Name: Name of transaction. Available on theTransactions tab only.
n
Endpoint: IP address and ports used by the server. Available on the Servers tab only.
n
Latency: Average and standard deviation (STDEV) latency rates for the server or transaction.
n
Hits: Total number of hits in the specified time frame for the server or transaction, and rate of hits
n
per second.
Throughput: Total throughput in the specified time frame for the server or transaction, and the
n
average throughput.
Errors: Average rate of errors, as a percentage, for the server or transaction.
n
VMware, Inc.
Chapter 2 Viewing Performance Data
"Managing SSL Keys," on page 31.
23