MINOURA MAGTURBO BASIC Instruction Manual page 5

Tighten the knob bolt until it starts to move the drive roller towards your tire.
5
It is O.K. to use your hand to assist in this process.
Once the drive roller comes in contact with your tire, tighten the knob bolt
another half or one more turn. This should provide optimal contact with your
tire.
This is a guidleine and adjustment one way or the other may be necessary in
order to provide the best contact. (see Fig. D)
Be sure too much or too few roller pressure to the tire will cause a problem
such as wearing down so quickly.
(Fig. D)
- 5 -