Using The Mag Unit; Increasing Load Force; Decreasing Load Force; To Remove Your Bicycle From The Trainer - MINOURA HYPERRIM Manual

To remove your bicycle from the trainer:

4
First, push down both white levers (see Fig. J). This
releases the rollers and drive pulleys from the bicycle rim.
Then rotate the hub-clamp counter-clockwise until loose,
and pull out the bicycle.

USING THE MAG UNIT

The Mag Unit has seven different levels of load force, replicating actual riding resistance.
The load settings range from high (H) to low (L) and can be adjusted via the orange dial on the Mag
Unit. The rider may also adjust the load force by shifting up or down among his gears, depending on
the level desired.
We recommend that you start with a medium to low load force and gradually work up, increasing force
as muscled warm up.

Increasing Load Force

To increase the load force, turn the orange dial on the Mag unit toward
the "H" symbol. (see Fig. K)
When your Mag unit is a remote control type, twist the lever on your
handlebar toward the "H" symbol.

Decreasing Load Force

To decrease the load force, turn the orange dial on the Mag unit
toward the "L" symbol. (see Fig. L)
The lowest selection is not zero load; there still be a small level
of force.
When your Mag unit is a remote control type, twist the lever on
your handlebar toward the "L" symbol.
- 6 -
(Fig. J)
H
(Fig. K)
L
(Fig. L)
L
H