Windows 95/98 (Or Later) Peer-To-Peer (Hp Jetadmin Compatible Method) Troubleshooting; Windows 95/98/Nt 4.0 Peer-To-Peer Print (Netbios) Troubleshooting - Brother HL 1270N - B/W Laser Printer Network User's Manual

Windows 95/98 (or later) Peer-to-Peer (HP JetAdmin
compatible method) Troubleshooting
If you are having trouble printing on a Windows 95/98 (or later) Peer-to-Peer network, check
the following (HP JetAdmin compatible method):
1.
-
-
-
Windows 95/98/NT 4.0 Peer-to-Peer Print (NetBIOS)
Troubleshooting
If you are having trouble printing on a Windows 95/98/NT 4.0 (or later) Peer-to-Peer network
(NetBIOS), check the following:
1.
2.
If the print server does not show up under JetAdmin on a Windows 95/98 Peer-to-Peer
network, try removing all of the Windows 95/98 network software from the Network
Control panel and then reinstalling them as follows:
First install the IPX/SPX-Compatible Protocol (or the TCP/IP protocol if you are
using a later version of JetAdmin), the Client for Microsoft Networks, and the
network adapter card driver.
Install the Latest HP JetAdmin software
Restart the system, and then add the HP JetAdmin service.
Make sure that the Brother NetBIOS Port driver is securely installed and configured
according to the Windows 95/98/NT 4.0 Peer-to-Peer (NetBIOS) chapters. You may
find that during the installation of the port driver, the screen that prompts you for a Port
name is not displayed. This happens on some Windows 95/98/NT 4.0 computers. Press
the ALT and TAB keys to make it appear.
Make sure that the print server is configured to be in the same workgroup or domain as
the test of your computers. It may take several minutes for the print server to appear in
the network neighborhood.
10-7