Brother HL 1270N - B/W Laser Printer Network User's Manual page 59

Setup from the CD-ROM
1. Start the CD-ROM installation menu program according to the Quick Setup guide.
2. Select the proper Model and Software Installation menu. Then select the Network Print
Software menu to start the Brother Network Print Software installation program.
Common (floppy disk and CD-ROM)
3. Push the Next button in response to the Welcome message.
4. Select the Brother Internet Print button.
5. Select the desired directory to install the BIP files and then push Next. The installation
program will create the directory for you if it does not already exist.
6. Select either WINSOCK (the default) or MAPI (Windows 95/98 only) as the mail
transport protocol and press Next. Most mail programs, include Microsoft Exchange
which is included with Windows 95/98, use MAPI. The installation program will then
begin installing the files.
7. You will then be asked for a port name. Enter the name of the port. The port name
must begin with the BIP and end with a number, for example, BIP1.
8. You will then see a message about Partial E-mail Print. Partial E-mail Print is the
ability of the Brother Internet Print software to break down E-mail Print jobs into
smaller sections to prevent a mail file size limitation problem for mail server.
9. Press OK to continue.
10. You will then be asked to enter the port settings for the remote print server:
Enter any unique legal Internet E-mail address for the remote print server (for example
emailprinter@xyz.com). Note that Internet E-mail addresses cannot have spaces in
them.
If you are using WINSOCK, enter your E-mail address and the IP address of your
SMTP E-mail server (consult your network administrator if you do not know this
address). Also specify if you are going to use the Partial E-mail Print option and
Notification type.
11. Press OK to continue. You will then be asked to re-start your computer.
12. One your computer has re-started you must create a printer on your Windows
95/98/NT4.0 system using the standard Windows 95/98/NT4.0 printer setup procedure.
To do this, go the Start button, select Settings and then Printers.
13. Select Add Printer to begin the printer installation.
14. Click Next when you get the Add Printer Wizard window (Windows 95/98 only).
15. Select Local Printer (Windows 95/98), My computer (Windows NT4.0) when you
are asked how the printers are connected to your computer and push Next.
5-6