Ready And Error Lights; Paper Feeding Problems - Epson 5700i - EPL B/W Laser Printer User Manual

EPSON EPL-5700i
4. Slide the photoconductor unit gently out of the printer.
5. Remove the new photoconductor unit from its bag.
Caution:
Never touch the photoconductor
unit's light-sensitive drum;
otherwise, print quality may be
impaired.
6. Insert the pins on each side of the new photoconductor unit
into the grooves inside the printer. Slide the unit gently into
the opening until it locks into place.
8 - EPSON EPL-5700i
7. Reinstall the developer cartridge.
8. Press down the printer cover until it clicks shut.
9. After turning on the printer, access the printer settings
dialog box in the printer driver, and click the
button. The OPC level clear dialog box is displayed.
Clear
10. Click to reset the Photoconductor level counter.
OK

Ready and Error Lights

The ready (green) and error (red) lights on the top of the
printer indicate the status of the printer, as described in the
following table:
Ready light Error light
(green) (red)
Off Off
On Off
Flashing Off
Off Flashing
Off On

Paper Feeding Problems

Preventing Paper Feed and Paper Jam
Problems
If you have frequent paper feed or paper jam problems, try the
following:
Fan the stack of paper and then tap its edges to align them
before loading.
Don't overfill the paper tray.
Be sure to adjust the paper guides so that the paper feeds
correctly.
Never allow more than 100 sheets to accumulate on the
output tray.
Try turning over the stack of paper in the paper tray. Most
paper packages indicate the best side for printing.
9/99
OPC Level
Printer status
Printer is off.
Printer is ready.
Printer is warming up or receiving data.
Printer is out of paper or has a paper jam.
Printer may require a service call. Try turning
off the printer and then turning it back on. If
this does not remedy the error, contact your
dealer or a qualified service person.