iDect X2 User Manual page 2

Important note — emergency calls
The iDECT X2 is not designed for making emergency
calls if the mains power fails. So you should make
alternative arrangements for access to Emergency
Services.
(This means that you should also have a basic
phone, that does not need mains power, connected
to your line so that you can make calls during a
power failure.)
Unpacking your iDECT X2 system
In the box are:
■
the cordless handset (up to four, depending on
which iDECT X2 system you've bought)
■
the base unit
■
two batteries and a battery compartment
cover for each handset
■
a telephone line cable for the base unit
■ a mains power lead and adapter for the base
unit
■ up to three charger pods, each with a separate
mains power lead and adapter, for multi-handset
systems
Keep the packaging materials in a safe place in
case you later need to transport the unit. Keep
your sales (till) receipt, which is your guarantee.
Before you can use the handset to make calls
you'll need to fit and fully charge the batteries,
as described on pages 5 and 6. Please read the
notes on page 4 before you install the base unit.