iDect X2 User Manual page 45

Color profile: Disabled
Composite Default screen
Troubleshooting
"Last Number When you first make a call, after keying in the outside
line access code (e.g. 9), press and hold the
Redial and/or
Number Redial button until a
memory dialling
This inserts a pause between the access code and the
don't work on
telephone number. You should later be able to redial
a PBX."
the number.
When storing numbers in memory, you can include the
outside line access code (e.g. 9) with each number.
If your PBX requires you to wait for a second Dial tone
before dialling the telephone number, press and hold
the Last Number Redial button for a pause
between the access code and the number.
If the fault persists ...
Disconnect all other instruments connected to the
same line as the iDECT X2 and see whether you can
make a call.
Disconnect the base unit from the telephone line and
plug a different phone into the master telephone
socket. Try making a call. If this works, the line is OK.
If the call does not work, and you are using a two-way
socket adapter, remove it and plug a telephone
directly into the socket. If the call now works, the
adapter may be faulty.
If you cannot make a call, the fault may be on the
exchange line. Contact the service provider (the BT
engineers on 151, or your cable company).
42
Last
appears on the display.
P