Table of Contents
Advertisement
starting point will be your current position on the map.
Tap
to change your starting point, you will be taken to the Search Menu screen. You can
then enter the start point just as if you had entered a destination (see page 20). Once the start
point has been entered the unit will begin calculating the route and then drive the route
automatically.
Tap
to keep your current location as the start point, the unit will begin calculating the
route and then drive the route automatically.
9.4 Route Options
The route options menu allows you to configure
the route to your preference. Tap
screen will change to the route options screen.
From here you can enable or disable a number of
options relating to how the route is calculated.
The currently selected options are shown with an
orange indicator.
Use of Motorway - When selected the unit will use motorways in the route calculation.
Use of Ferries -
Shortest Route -
Quickest Route -
Avoid Toll Roads - When selected the unit will calculate a route which does not use toll roads.
10 Route Navigation Menu
While navigating or simulating a route
tapping the
button will take you to the
Route Navigation Menu. From here you can
obtain detailed information about the route
you have calculated or make changes to the
settings without having to exit navigation.
10.1 Route Plan
This takes you back to the Route Plan Menu
(see page 34). From here you can
add/remove waypoints, change the Route Options or even simulate the route. Tapping
result in the route being recalculated from your current position. Any changes will be taken in to
consideration when calculating the route.
10.2 Detour
This option allows you to navigate around any
traffic jams or blocked roads which are along
your planned journey. When tapped the screen
will change to show the available distance
options. You will need to estimate the distance to
the blocked road/traffic jam then choose the
option which is the next lowest distance.
When selected the unit will use ferries in the route calculation.
When selected the unit will calculate a route which covers the shortest
distance.
When selected the unit will calculate a route which has the shortest travel
time.
the
NAVIGATION
will
Advertisement
Table of Contents
