Table of Contents
Advertisement
The selected option will be shown with an orange indicator.
Automatic – When selected the unit will always set the time zone according to your current GPS
position.
Manually – When selected you can manually set the time zone by using the
select the desired time zone from the list.
In addition to setting either automatic or manually, you can select to have the unit automatically
adjust its self for daylight saving. To activate daylight saving tap in the box so that an orange tick is
shown.
Once set tap
to the settings screen without saving.
8.11 Brightness
Allows you to change the brightness of the screen
so as to optimise it for differently lit environments.
Tapping will change the screen to the brightness
setting screen.
There are 5 settings available and are shown as
bars, with an arrow indicating the currently
selected level. Use the
the required level, the brightness will be reflected
in the screen as the change is made.
Once set tap
to the settings screen without saving.
8.12 Calibration
This option allows you to calibrate the screen so that it responds accurately to your screen taps.
You will need this function only if the unit begins to respond inconsistently to your screen taps.
When tapped your will be shown a warning screen, tap
calibrate the screen. The screen will change to the calibration screen; follow the onscreen
instructions in order to complete the calibration process.
9 Route Plan
Once you have entered your destination and
confirmed it is correct, you will be taken to the
Route Plan screen; from here you can begin
navigating, carry out a simulation of the route or
add additional waypoints to the journey.
Tap
to return to the Free Navigation
Menu screen.
Select a destination so that it is highlighted
to confirm the selection and return to the settings screen. Tap
and
keys to set
to confirm the selection and return to the settings screen. Tap
and
to confirm you would like to
NAVIGATION
keys to
to return
to return
Advertisement
Table of Contents
