Upgrading To Serial Ata Raid 0 Configuration From A Single Drive Configuration - Intel D865PERL Product Manual

Hide thumbs Also See for D865PERL:

Table of Contents

Intel Desktop Board D865PERL Product Guide

Upgrading to Serial ATA RAID 0 Configuration from a Single Drive Configuration

1. Install the second Serial ATA drive in the system. Refer to section "Connecting the Serial

ATA (SATA) Cable" on page 39.

2. Start the system and boot into Windows XP.

3. Launch the Intel Application Accelerator from the Start Menu

(Start ´ All Programs ´ Intel Application Accelerator ´ Intel Application Accelerator).

4. From the RAID tab, right-click on "RAID Volume" and select "Create from Existing Disk."

5. Select the source disk to create the RAID Volume and then press the "Next" button.

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the D865PERL and is the answer not in the manual?