Engine Oil And Gasoline - HYOSUNG SF 50 B Manual

CLEAN OF BATTERY TERMINAL
Clean the battery terminal when it is
dusty or rusted.
1. Set the ignition switch
tion.
2. Disassemble the pillion seat and battery
cover, disassemble the (
tery wire after the ( ) negative battery
wire.
Remove the battery.
3. Clean the terminal.
If there is white dust, clean it with warm
water.
4. Assemble the battery wires and grease
the terminal lightly.
CAUTION
Keep the battery away from fires.
When disassemble the battery wire,
take off terminal first with the igni-
tion switch
When assemble,
Fasten certainly the battery wires.
Incorrect installation of the battery
will reverse the terminal position
resulting in possible electrical sys-
tem damage due to incorrect battery
lead connection.
Never charge a battery while still in
the machine as damage may result
to the battery or regulator/rectifier.
(OFF) posi-
+ ) positive bat-
(OFF ) position.
terminal first.
TRANSMISSION OIL
Check if the transmission oil leaks.

ENGINE OIL AND GASOLINE

Check if there is leakage around the oil
pump and oil tank.
48