How To Supply The Engine Oil - HYOSUNG SF 50 B Manual

Table of Contents

Advertisement

HOW TO SUPPLY THE ENGINE OIL

1. Hold the motorcycle vertically with the
center stand.
2. Open the seat and oil tank cap.
3. Fill the engine oil.
(Use the recommended oil)
4. Tighten the oil tank cap tightly.
5. Close the seat.
6. Confirm the seat lock.
WARNING
Never operate the motorcycle without
an adequate amount of oil, if the engine
runs out of oil, it can stop suddenly,
causing injury and/or severe mechanical
damage.
CAUTION
Don t mix the unrecommended
oil. It could damage the engine.
When refilling the oil tank, Don t
allow the dust to get inside.
Mop the oil spilt.
Don t put the patch on the cap. It
could disturb the oil to be provid-
ed and damage the engine.
New and used oil and solvent can be
hazardous. Children and pets may be
harmed by swallowing new or used
engine oil or solvent. Continuous con-
tact with used engine oil has been found
to cause skin cancer in laboratory ani-
mals. Brief contact with used oil or sol-
vent may irritate skin.
Keep new and used oil and solvent
away from children and pets.
Wear a long-sleeve shirt and water-
proof gloves.
Wash with soap if oil or solvent con-
tact your skin.
24
WARNING

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sf 50b - v1MotorcycleSf50b

Table of Contents