Removing The Battery Charger Board - Compaq 1200US - Presario - Celeron 800 MHz Maintenance And Service Manual

| Home Page
Illustrated Parts Catalog

Removing the Battery Charger Board

Electrostatic
Discharge
Service
Considerations
Cables and
Connectors
Preparing the
Computer for
Disassembly
Battery Pack
Palmrest
Cover with
Touch Pad
Heatspreader
Keyboard
Processor
Hard Drives
CD Drive
Battery
Charger Board
Modem
Display Panel
Assembly
Upper CPU
Cover
Speaker
Assembly
Diskette Drive
Fan Assembly
System Board
Dip Switch
Settings
Memory
Module
Maintenance & Service Guide
Presario 1200 Series
Model: 1245
| Notice | Preface |
| Removal & Replacement Procedures
Pin Assignments |
Product Description
Battery Pack Operations
| Troubleshooting
| Specifications
To remove the
battery charger
board, complete
the following
steps:
1. Prepare the
computer for
disassembly.
2. Remove the
palmrest cover
with touch
3. Remove the
hard
4. Remove one
screw from the
battery charger
board, unplug
the board from
the connector
on the system
board, and lift
the battery
charger board
out of the
chassis.
To replace the
battery charger
board, reverse
the previous
procedures.
NOTE:
pad.
drive.
When
replacing
the
battery
charger
board,
ensure
that the
pins are
aligned
with the
connector
on the
system
board.