Removing The Keyboard - Compaq 1200US - Presario - Celeron 800 MHz Maintenance And Service Manual

| Home Page
Illustrated Parts Catalog

Removing the Keyboard

Electrostatic
Discharge
Service
Considerations
Cables and
Connectors
Preparing the
Computer for
Disassembly
Battery Pack
Palmrest
Cover with
Touch Pad
Heatspreader
Keyboard
Processor
Hard Drives
CD Drive
Battery
Charger Board
Modem
Display Panel
Assembly
Upper CPU
Cover
Speaker
Assembly
Diskette Drive
Fan Assembly
System Board
Dip Switch
Settings
Memory
Module
Maintenance & Service Guide
Presario 1200 Series
Model: 1245
| Notice | Preface |
| Removal & Replacement Procedures
Pin Assignments |
Product Description
Battery Pack Operations
| Troubleshooting
| Specifications
To remove the
keyboard,
complete the
following
steps:
1. Prepare the
computer for
disassembly.
2. Remove
the
cover with
touch
3. Turn the
keyboard
over, and
allow it to rest
on top of the
palmrest
cover with
touchpad slot
opening.
4. Remove
the
heatspreader
5. Disconnect
the flex cable
from the ZIF
connector on
the system
board.
To replace the
keyboard,
reverse the
previous
procedures.
Return to
Removal &
Replacement
Procedures
palmrest
pad.
.