Docking A Peripheral Device - HP -380467-003 - COMPAQ PRESARIO C300 C500 C700 F500 F700 LAPTOP CHARGER Getting Started Manual

Docking a peripheral device

To use the multi-storage bay for a peripheral device, do the following:
1 Open the bay cover (A). Hold the cover on each side near the hinges, and then
lift the cover and slide it toward the back of the chassis (C). Gently lift it off.
2 Thread the cables through the cable tunnel opening at the back of the bay (D).
Connect data and power cables to the peripheral device, and place the
peripheral in the bay.
3 Connect the data cable to the USB or FireWire (IEEE 1394) connector on the
back of the PC. Plug the power cord for the peripheral device into a power
outlet.
Working with Sound, Pictures, and Video
49