HP -380467-003 - COMPAQ PRESARIO C300 C500 C700 F500 F700 LAPTOP CHARGER Getting Started Manual page 46

A In-use light
B Upper-left slot
C Lower-left slot
D Upper-right slot
E Lower-right slot
40
Getting Started Guide
Using the memory card reader
CompactFlash and Microdrive are keyed and cannot be inserted
NOTE:
incorrectly. Insert the receptacle edge (holes) of this media into the slot.
For the two-slot reader, the Secure Digital (SD) card, the MultiMediaCard (MMC),
and the Memory Stick (MS or MS-Pro) cards must be inserted upside down (gold
connector fingers facing up). Note the direction of the notched corner on the
media.
1 Insert the media into the card slot until it stops. The in-use light (A) on the card
reader lights, and the PC automatically detects the media.
2 The PC opens a window so you can use the media contents. You can copy files
from or to the media.
3 When you are finished, right-click the drive icon, select Eject, check that the
in-use light is on but not blinking, and then remove the media. A steady light
indicates that the PC is not reading or writing the media.
WARNING: Do not try to remove media when the in-use light is
blinking. Doing so may cause loss of data.
4-slot memory card reader
Card
CompactFlash Type I media
CompactFlash Type II media
IBM Microdrive disk drive
Secure Digital (SD)
Memory Card
MultiMediaCard (MMC)
Memory Stick (MS)
Memory Card
Memory Stick (MS-Pro)
Memory Card
SmartMedia (SM) Memory Card
xD media
Insert
Receptacle edge (holes)
Receptacle edge (holes)
Receptacle edge (holes)
Facing up
Facing up
Facing up
Facing up
Facing up
Facing up
Into 4-slot reader
C (lower-left)
C (lower-left)
C (lower-left)
D (upper-right)
D (upper-right)
E (lower-right)
E (lower-right)
B (upper-left)
B (upper-left)