Parameter Check; Manual Setup; Speaker Setup; Speaker Configuration - Denon AVR 1909 - AV Receiver Owner's Manual

ENGLISH
s Parameter Check
Check auto setup measurement results.
This is displayed after the auto setup procedure is completed.
[Selectable items]
Distance Check
Speaker Confi g. Check
Channel Level Check Crossover Freq. Check
EQ Check
The auto setup results can be set again when "Restore" is selected.

For details on how to select, set and cancel settings for each menu, see "Menu Operations" (vpage 22).

Manual Setup

Symbols used to indicate buttons in this manual
Button located on both the main unit and the remote control
unit
Button only on the main unit
Button only on the remote control unit
SOURCE SELECT <DIMMER>
<SPEAKERS> <MENU>
[Front]
SOURCE
SELECT
[Rear]
SOURCE
SELECT
[A. MENU]
uiop
[TEST]
Make detail settings for various parameters.

Speaker Setup

BUTTON
Use this procedure to set the speakers manually or if you wish to
<BUTTON>
change the settings made with the auto setup procedure.
[BUTTON]
F Menu screen F
MENU
ui
1.Auto Setup
2.Manual Setup
3.Input Setup
4.Parameter
5.Information
a Speaker Confi guration
op
Select speaker confi guration and size.
(bass reproduction capability)
Front Speaker
Select front speaker size.
[Selectable items] Large
Center Speaker
Select center speaker use and size.
[Selectable items] Large
Subwoofer
Select subwoofer use.
[Selectable items] Yes
2.Manual Setup
1.Speaker Setup
2.HDMI Setup
3.Audio Setup
4.ZONE2 Setup
5.Option Setup
Small
Small None
No