Convenient Functions; Hdmi Control Function - Denon AVR 1909 - AV Receiver Owner's Manual

Convenient Functions

HDMI Control Function

When AVR-1909 is connected to a TV and player compatible with
HDMI control function, you can perform the following operations.
Settings other than AVR-1909 settings must be made on the
respective devices. (Check the operating instructions of each
device for details.)
AVR-1909 power off can be linked to the TV power off step.
•
When you set "Output audio from amp" in the TV audio output setup
operation, you can switch the amp power on.
You can switch audio output devices with a TV operation.
•
(When outputting from the TV speakers, output switches from
speakers connected to AVR-1909).
You can adjust AVR-1909 volume in the TV volume adjustment
•
operation.
You can switch AVR-1909 input source through linkage to TV input
•
switching.
When playing the player, the AVR-1909 input function switches to
•
the function of that player.
• When you want to listen to TV audio by AVR-1909, connect optical
digital or analog.
If the TV you are using has both connection jacks, use the optical
digital connection.
• When using these functions set as follows: menu "Manual Setup"
– "HDMI Setup" – "HDMI Control" set to "ON" (vpage 32).
NOTE
When using the HDMI control function, do not assign HDMI input to "TV/
CBL" by setting "Input Setup" – "Assign" – "HDMI In" in the menu.
Connections
Player compatible
with HDMI
control function
Television compatible with
HDMI control function
L R
L R
ENGLISH ENGLISH