Denon AVR 1909 - AV Receiver Owner's Manual page 43

i/p Scaler
Make settings for i/p scaler function.
[Input source] DVD HDP TV/CBL VCR
[Selectable items]
A to H
: Use i/p scaler function for analog video signal.
OFF
: Do not use i/p scaler function.
NOTE
When the "Convert" setting is "OFF" , you cannot set "i/p scaler" .
Resolution
Make settings for resolution of HDMI video output signal.
[Input source] DVD HDP TV/CBL VCR
[Selectable items]
Auto
: Detect monitor panel resolution and automatically set
output resolution.
480p/576p
: Output at 480p/576p resolution.
1080i
: Output at 1080i resolution.
720p
: Output at 720p resolution.
1080p
: Output at 1080p resolution.
This can be set when "i/p Scaler" is set to "A to H" .
NOTE
• It is not possible to convert "1080i" signals into "720p" format.
• It is not possible to convert "720p" signals into "1080i" format.
Progressive Mode
Select optimum progressive mode for video material.
V.AUX [Input source] DVD HDP TV/CBL
[Selectable items]
Auto
: Automatically detect video material type.
Video1
: Select mode suitable for video playback.
Video2
: Select mode suitable for video and 30-frame film material
playback.
This can be set when "i/p Scaler" is set to "A to H" .
Aspect
V.AUX
This sets the aspect ratio when outputting 480i/576i or 480p/576p
input signals from the HDMI output connector.
[Input source] DVD HDP TV/CBL
[Selectable items]
Full
: Output at 16:9 aspect ratio.
Normal
: Output at 4:3 aspect ratio.
This can be set when "i/p Scaler" is set to "A to H" .
For details on how to select, set and cancel settings for each menu, see "Menu Operations" (vpage 22).
VCR V.AUX
VCR V.AUX
ENGLISH ENGLISH
0 0