Denon AVR 1909 - AV Receiver Owner's Manual page 87

GVideoH
Symptom Cause
No picture • The connections between the
appears. AVR-1909 and monitor are faulty.
• The monitor's input setting is
wrong.
• PURE DIRECT mode is set.
• The player is connected using the
component input connectors, the
monitor is connected using the
video (yellow) or S-Video output
connectors.
Picture cannot be • Input source does not match
recorded. recorder's video connection
connector (video or S-Video).
DVDs cannot be
copied on a VCR.
–
On-screen
display is not
shown.
• The operation content display is
"OFF" .
• The main volume display is
"OFF" .
• The display during tuner operation
is "OFF" .
• The display during iPod operation
is "OFF" .
Countermeasure Page
• Check the connections. 12 ~ 16
• Set properly. –
• Cancel the PURE DIRECT mode. 46
• High definition (1080i/720p) and –
progressive (480p/576p) video
signals are not down-converted.
Set the player to interlace
(480i/576i) signals.
• The video conversion function 15
does not work for the REC
OUT connectors. Match the
input source and recorder
connections.
• This is not a malfunction. Most –
movie software includes copy
prevention signals and cannot be
copied.
• When viewing HDMI or 9
component video signals via the
AVR-1909, the on-screen display
MENU
appears when the button
A.MENU
on the main unit or the
button on the main remote
control unit.
• When only HDMI or component 9
video signals are input to the
AVR-1909, the characters of
the on-screen display are not
displayed over the picture.
• Set "Manual Setup" – "Option 36
Setup" – "On-Screen Display"
– "Text" to "ON" .
• Set "Manual Setup" – "Option 36
Setup" – "On-Screen Display"
– "Master Volume" to "ON" .
• Set when "Manual Setup" 36
– "On-Screen Display" – "Tuner
Information"is not "OFF" .
• Set when "Manual Setup" 36
– "On-Screen Display" – " iPod
Information" is not "OFF" .
GHDMIH
Symptom Cause
HDMI audio • The "Manual Setup" – "HDMI
signals are not Setup" – "HDMI Audio Out"
output from setting is set to"TV"
speakers.
No picture • The connections to the HDMI
appears connectors are faulty.
with HDMI • HDMI input setting is improper.
connections. • The monitor is not compatible
with copyright
(HDCP).
• The HDMI format of the player
and monitor do not match.
No sound is • The "Manual Setup" – "HDMI
output from Setup" – "HDMI Audio Out"
the monitor setting is set to "Amp" .
connected
with HDMI
connections.
When performing • HDMI's CEC function
the following operating.
operations on a
connected device,
AVR-1909 has the
same operations.
⋅ Power ON/OFF
⋅ Switching audio
output devices
⋅ Adjust volume
⋅ Switch input
source
Countermeasure
• Set to "Amp"
• Check the connections.
• Check the HDMI input setting.
• Connect a monitor that is
protection compatible with copyright
protection (HDCP).
• Match the HDMI format of the
player and monitor.
• Set to "TV" .
is • Set "Manual Setup" – "HDMI
Setup" -– "HDMI Control" to
"OFF" .
When you only want to operate
the power on/off each device, set
"Power Off Control" to "OFF" .
ENGLISH ENGLISH
Page
32
12
42
12
12
32
32