Table of Contents
Advertisement
Installing the Dialogic® Vision™ Server TIGW1U
[Íslenska]
Hér með lýsir Dialogic Corporation yfir því að ITE er í samræmi við grunnkröfur og aðrar kröfur, sem
gerðar eru í tilskipun 1999/5/EC, 2004/108/EC, 2006/95/EC.
[Norsk]
Dialogic Corporation erklærer herved at utstyret ITE er i samsvar med de grunnleggende krav og øvrige
relevante krav i direktiv 1999/5/EF, 2004/108/EF, 2006/95/EF.
FCC Part 15 Class A statement
This board has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference, in which case the user will be required to
correct the interference at his or her own expense.
Canadian ICES-003 statement
This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est
conforme à la norme NMB-003 du Canada.
Australia
Dialogic is required to provide the following information as a condition of the telecommunications
conformity of Dialogic® telecommunications products. You may also be responsible for meeting
requirements other than those outlined in this document.
Note: Failure to meet the requirements listed may render the products non-
compliant, with the user liable to significant penalties under the Telecommunications
Act.
Do not connect these products directly to a telecommunications network. These products must be
connected to a network terminating unit (NTU) or some other device that provides line isolation. This
allows the carrier's telecommunications network to be electrically isolated from the product and host PC.
These products are only to be connected to safety extra low voltage circuits. These products should only
be connected to the safety extra low voltage (SELV) port of the network termination unit (NTU) or PBX
that is providing the E-1 interface.
Japan
VCCI – Class A ITE. Class A Statement for Class A Products.
Translation: This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures. VCCI-A
10
Dialogic Corporation
Advertisement
Table of Contents
