Selecting Uconnect™ Studios (Satellite) Mode; Selecting A Channel; Storing And Selecting Preset Channels - Dodge 2010 Ram Truck Chassis Owner's Manual

UP button until all 12 ESN/SID digits display. The SEEK
DOWN will page down until the first four digits display.
The radio will exit the ESN/SID mode when any other
button is pushed, the ignition is turned OFF, or five
minutes have passed since any button was pushed.
Selecting uconnect™ studios (Satellite) Mode
Selecting Satellite Mode
Press the MODE button repeatedly until the word SAT
appears in the display.
A CD may remain in the radio while in the Satellite radio
mode.

Selecting A Channel

Press and release the SEEK or TUNE knob to search for
the next channel. Press the top of the button to search up
and the bottom of the button to search down. Holding the
TUNE button causes the radio to bypass channels until
the button is released.
UNDERSTANDING YOUR INSTRUMENT PANEL 187
Press and release the SCAN button (if equipped) to
automatically change channels every seven seconds. The
radio will pause on each channel for seven seconds
before moving on to the next channel. The word SCAN
will appear in the display between each channel change.
Press the SCAN button a second time to stop the search.
NOTE: Channels that may contain objectionable content
can be blocked. Contact Sirius Customer Care at 888-539-
7474 to discuss options for channel blocking or unblock-
ing. Please have your ESN/SID information available.

Storing And Selecting Preset Channels

In addition to the 12 AM and 12 FM preset stations, you
may also commit 12 satellite stations to pushbutton
memory. These satellite channel preset stations will not
erase any AM or FM preset memory stations. Follow the
memory preset procedures that apply to your radio.
4