Installing Adapters - IBM 8185 - ThinkCentre M50 - 256 MB RAM User Manual

To install a DIMM:
1. Remove the cover. See "Removing the cover" on page 31.
2. You might have to remove an adapter to gain access to the DIMM slots. See
3. Locate the DIMM connectors. See "Identifying parts on the system board" on
4. Open the retaining clips.
5. Make sure the notches in the DIMM align with the tabs on the connector. Push

Installing adapters

This section provides information and instructions for installing and removing
adapters. Your computer has three expansion slots for PCI adapters and one slot
used for an AGP adapter. You can install an adapter up to 340 mm (13.4 inches)
long.
34
User Guide
"Installing adapters" on page 34.
page 32.
or insert the DIMM straight down into the connector until the retaining clips
close.
What to do next:
v To work with another option, go to the appropriate section.
v To complete the installation, go to "Replacing the cover and connecting the
cables" on page 45.