Dodge 2010 Caliber Owner's Manual page 340

Dodge 2010 caliber automobile owner's guide
Hide thumbs Also See for 2010 Caliber:
Table of Contents

Advertisement

graphic display of the pressure value(s) will stop flash-
ing, and the Tire Pressure Monitoring Light will extin-
guish once the updated tire pressure(s) have been re-
ceived. The vehicle may need to be driven for up to
20 minutes above 15 mph (25 km/h) to receive this
information.
Check TPMS Message
The Tire Pressure Monitoring Telltale Light will flash on
and off for 75 seconds, and remain on solid when a
system fault is detected. The system fault will also sound
a chime. The EVIC will display a "CHECK TPM SYS-
TEM" message for three seconds. This text message is
then followed by a graphic display, with "- -" in place of
the pressure value(s) indicating which Tire Pressure
Monitoring Sensor(s) is not being received.
Check TPM System Display
If the ignition key is cycled, this sequence will repeat,
providing the system fault still exists. If the system fault
no longer exists, the Tire Pressure Monitoring Telltale
Light will no longer flash, the CHECK TPM SYSTEM
text message will not be present, and a pressure value
STARTING AND OPERATING 339
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents