Caller Id (Cid); Receiving And Storing Cid Records; Reviewing Cid Records - RCA 25255RE2 - ViSYS Cordless Phone Base Station User Manual

Caller ID (CID)

IMPORTANT: In order to use this unit's Caller ID features, you must subscribe
to either the standard Name/Number Caller ID Service or Call Waiting Caller ID
Service. To know who is calling while you are on the phone, you must subscribe
to Call Waiting Caller ID Service.
When the unit receives an incoming call with CID information, the CID can be shown on
the base and handsets.

Receiving and Storing CID Records

This unit receives and displays information transmitted by your local phone company.
This information can include the phone number, date and time; or the name, phone
number, date and time. The unit can store up to 99 records for later review. When the
memory is full, a new call automatically replaces the oldest call in memory. NEW appears
in the display for calls received that have not been reviewed. The line number for the call
received is also displayed.
If two incoming calls come in at the same time, both L1 and L2 phone numbers shows on
the display while ringing.
By pressing the exit key on the
mode, the base unit or handset
handset will not ring in the subsequent ring cycles, but the line icon and handset line Soft
key will keep flashing and the base Line LED and handset message LED will flash until the
call is answered or the answering system picks up.

Reviewing CID Records

Press CID button, and then use the VOL (- or +) button to scroll through the call records.
•
When you scroll to the start/end of the list, the screen displays --START/END-- .
•
• When reviewing the CID records, the record number is also shown to the right of the
time along with the FORMAT and STORE Soft keys.
Base Display
L1
LINE1
Handset Display
base unit or handset during the incoming call ringing
will stop ringing and go back to idle mode. The
LINE2
base unit or
33