Making Calls In The Speakerphone Mode (From The Base); Making Calls In The Speakerphone Mode (From The Handset); Making Calls With The Optional Headset - RCA 25255RE2 - ViSYS Cordless Phone Base Station User Manual

2-line intercom speakerphone dect6.0 corded/cordless handset telephone answering system
Hide thumbs Also See for 25255RE2 - ViSYS Cordless Phone Base Station:
Table of Contents

Advertisement

Making Calls in the Speakerphone Mode
1. Press the speaker button (in base), the unit will pick the available line for you. If both
lines are available, Line 1 will be used first.
-OR-
Press line 1 or line 2 button on the base to select the line, and the base's speaker will
activate.
2. Wait for a dial tone then dial a phone number or press One-Touch/Memory Log button
(1- 10 ) to dial stored phone number.
3. Press the speaker button when finished.
NOTE: After pick the line, the call timer starts to run until all the calls are hung
up. The timer serves for both 2 lines.
Making Call in the Speakerphone Mode
1. Press the Spk button to activate the speakerphone on the first available line.
-OR-
Press the LINE 1 or LINE 2 Soft key to select a specific line. The handset will activate the
ear piece.
2. Press the Spk button to switch to speakerphone mode.
3. Wait for a dial tone then dial the phone number.
4. Press the end button when finished.

Making Calls with the Optional Headset

1. Plug the headset into the Headset jack on the side of the base or side of the cordless
handset.
2. Adjust the headset to rest comfortably on top of your head or over your ear.
3. Move the microphone to approximately 2 to 3 inches from your mouth.
4. For the base, press the headset button on base and the phone automatically selects
first available, if both lines are available, Line 1 will be used.
5. For the cordless handset, press the Talk button.
6. Wait for a dial tone, and then dial the phone number.
7. Press headset button (on base) or end button (on handset) when
finished.
CAUTION : Use Thomson Inc. 5-2425 or other compatible headset that is compatible
with this unit .
NOTE: If the headset is not connected (or if not completely inserted into headset
jack), an error tone is heard when the Headset button is pressed.
NOTE: Headset performance may vary depending on the quality of the headset.
26
(from the base)
(from the handset)
.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents