Ring Delay; Message Length; Call Screening; Message Alert - RCA 25255RE2 - ViSYS Cordless Phone Base Station User Manual

Ring Delay

This feature lets you select the number of times you want the phone to ring before the
answering system answers a call.
From the Answering Sys Menu:
1. Press the VOL (- or +) button to scroll to the Ring Delay.
2. Press SELECT Soft key.
3. Use the VOL (- or +) button to scroll to your selection, from 2 rings to 6 rings or toll
saver, and use the DIR or CID button to toggle between L1 and L 2.
4. Press the SELECT Soft key to save your selection and the screen displays Saved .
NOTE: When the Toll saver is selected, the unit will answer the incoming call
after 3 rings if there is new message. Otherwise, the unit will answer the
incoming call after

Message Length

From the Answering Sys Menu:
1. Press the VOL (- or +) button to scroll to the Message Length .
2. Press SELECT Soft key.
3. Use the VOL (- or +) button to scroll to your selection, from 1 to 3 minutes, and use the
DIR or CID button to toggle between L 1 and L 2.
4. Press the SELECT Soft key to save your selection and the screen displays Saved .

Call Screening

From the Answering Sys Menu:
1. Press the VOL (- or +) button to scroll to the Call Screening .
2. Press SELECT Soft key. Use the VOL (- or +) button to select On or Off .
3. Press the SELECT Soft key to save your selection and the screen displays Saved .

Message Alert

This feature set your answering system to give an alert tone every 10 seconds when there
are new messages.
From the Answering Sys Menu:
1. Press the VOL (- or +) button to scroll to the Message Alert .
2. Press SELECT Soft key. Use the VOL (- or +) button to select On or Off . Default is Off.
3. Press the SELECT Soft key to save your selection and the screen displays Saved .
24
5 rings.