Table of Contents
Advertisement
190 UNDERSTANDING YOUR INSTRUMENT PANEL
When the vehicle automatically transitions from AWD to
RWD the EVIC will display the following message for
five seconds.
All Wheel Drive (AWD) to Rear Wheel Drive (RWD)
Refer to "All Wheel Drive — If Equipped" in Section 5 for
more information on the All Wheel Drive (AWD) system.
Compass Display
The compass readings indicate the direction
the vehicle is facing. Press and release the
COMPASS button to display one of eight com-
pass readings and the outside temperature.
COM-
PASS
Button
Automatic Compass Calibration
This compass is self-calibrating, which eliminates the
need to set the compass manually. When the vehicle is
new, the compass may appear erratic and the EVIC will
display "CAL" until the compass is calibrated. You may
also calibrate the compass by completing one or more 360
degree turns (in an area free from large metal or metallic
objects) until the "CAL" message displayed in the EVIC
turns off. The compass will now function normally.
Advertisement
Chapters
Table of Contents
