UsInG thE BURR COFFEE MILL
Before First Use
Before using the Burr Coffee Mill, wipe the motor housing and cord with a clean damp
cloth. Wash the bean hopper, hopper lid, and coffee bin in hot soapy water, then rinse
and dry. The bean hopper, hopper lid, and coffee bin can also be washed in the top
rack of a dishwasher.
operating the Burr Coffee Mill
Make certain the Burr Coffee Mill is
unplugged. Attach the bean hopper to
the top of the motor housing by turning
the hopper clockwise until snug.
Slide the coffee bin onto the bin
platform; the bin seal plate on the
motor housing will compress slightly to
accommodate the bin. Make certain the
bin is centered in the middle of the bin
Fill the bean hopper to the level desired.
At maximum, the hopper holds 7 oz.
(200 g) of beans.
Note: This product is intended to
grind whole coffee beans only.
Place the hopper lid onto the hopper.
Plug into a grounded 3 prong outlet.
The tie provided on the power cord
can be used to bundle any excess cord.