JVC KD-AVX44 - DVD Player With LCD monitor Instructions Manual page 556

A
Connecting the external amplifiers
You can connect amplifiers to upgrade your car stereo system.
• Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so that it can be controlled through this unit.
• For amplifier only:
– After you have connected the center speaker, make sure to activate the center speaker; otherwise, no sound comes out of the connected center speaker, see page 51 of the INSTRUCTIONS.
– Disconnect the speakers from this unit, connect them to the amplifier. Leave the speaker leads of this unit unused.
– You can switch off the built-in amplifier and send the audio signals only to the external amplifier(s) to get clear sounds and to prevent internal heat buildup. See page 53 of the INSTRUCTIONS.
Remote lead
Rear speakers
JVC Amplifier
Front speakers
JVC Amplifier
B
Connections for external component playback
KS-HP2
Cordless headphones (not supplied)
KV-MR9010
9-INCH WIDESCREEN MONITOR (not supplied)
C
Connecting external components
When connecting the external components, refer also to the manuals supplied for the components
and adapter.
CAUTION:
Before connecting the external components, make sure that the unit is turned off.
You can connect a JVC CD changer (CD-CH)—CH-X1500, etc. to the CD changer jack.
You can also connect the following components through the various JVC adapters.
• Connection cords may need to be purchased separately.
Component
iPod
Portable audio player with line output jacks
Portable audio player with 3.5 mm stereo mini jack
When connecting an external component
CD changer jack
To disconnect the connector
Hold the connector top tightly (1), then pull it out (2).
Remote lead (Blue with white stripe)
Front speakers
* 7
Video cord (not supplied)
KV-CM1
Rear view camera
(not supplied)
Camcorder, Navigation System, etc.
Adapter Model name
Interface adapter for iPod KS-PD100
Line input adapter KS-U57
AUX input adapter KS-U58
CD-CH / KS-PD100 / KS-U57 / KS-U58
Y-connector (not supplied for this unit)
To the remote lead of other equipment
JVC Amplifier
Center speaker
Audio/video cords (not supplied)
USB device
USB cable—approx.1.2 m
You cannot connect a computer to the
USB ( ) terminal of the unit.
Connecting the iPod to the USB terminal
You can connect the iPod to the USB terminal using the following cables:
– To listen to the music: USB 2.0 cable (supplied for the iPod)
– To watch the video: USB Audio and Video cable for iPod—KS-U20K (not supplied)*
* 8
When using the cable, make sure <iPod (Off)> is selected
for <AV Input> (see page 52 of the INSTRUCTIONS).
• iPod is a trademark of Apple Inc., registered in the U.S. and other countries.
4
JVC Amplifier
Subwoofer
5
* Audio cord (not supplied)
6
* Firmly attach the ground wire to the metallic body or to
the chassis of the car—to the place uncoated with paint
(if coated with paint, remove the paint before attaching
the wire). Failure to do so may cause damage to the unit.
7
* To listen to disc playback sound while in Dual Zone
operations (see page 26 of INSTRUCTIONS).
USB device
8
KS-U20K
USB 2.0 cable
Apple iPod
Apple iPod