JVC KD-AVX44 - DVD Player With LCD monitor Instructions Manual page 398

Symptoms
• Noise is generated.
• Tracks cannot play back as you have intended
them to play.
• "Now Reading..." keeps flashing on the
monitor.
• Correct characters are not displayed (e.g.
album name).
• While playing a track, sound is sometimes
interrupted.
• Bluetooth device does not detect the unit.
• The unit does not make pairing with the
Bluetooth device.
• Phone sound quality is poor.
• The sound is interrupted or skipped while
using a Bluetooth audio player.
• The connected audio player cannot be
controlled.
Remedies/Causes
• The track played back is not a playable file format (MP3/
WMA/WAV/AAC). Skip to another file.
• Do not add the extension code <.mp3>, <.wma>,
<.wav>or <.m4a> to non-MP3/WMA/WAV/AAC
tracks.
Playback order may differ from the one played back using
other players.
• Readout time varies depending on the USB device.
• Do not use too many hierarchy, folders and empty
folders.*
* Folder that is physically empty or folder that contains
data but does not contain valid MP3/WMA/WAV/AAC
track.
• Turn off the power then on again.
• Do not pull out or connect the USB device repeatedly
while "Now Reading..." is displayed on the monitor.
For available characters, ☞ page 62.
The tracks have not been properly copied into the USB
device. Copy tracks again into the USB device, and try
again.
• Search from the Bluetooth device again.
• Reset the unit. When "Open..." appears on the monitor,
search from the Bluetooth device again.
• Enter the same PIN code for both the unit and target
device. If the PIN code of the device is not indicated on
its manuals, try "0000" or "1234."
• Reduce the distance between the unit and the Bluetooth
cellular phone.
• Move the car to place where you can get a better signal
reception.
• Reduce the distance between the unit and the Bluetooth
audio player.
• Disconnect the device connected for Bluetooth phone.
• Turn off, then turn on the unit.
• (When the sound is not yet restored,) connect the device
again.
Check whether the connected audio player supports AVRCP
(Audio/Video Remote Control Profile).
66