JVC KD-AVX44 - DVD Player With LCD monitor Instructions Manual page 385

Dvd/cd receiver
Hide thumbs Also See for KD-AVX44 - DVD Player With LCD monitor:
Table of Contents

Advertisement

Sound
Menu items
Fader/Balance
Adjusts fader
Adjust balance
Volume Adjust
*6
Subwoofer Level
High Pass Filter
Crossover
Amplifier Gain
*7
Rear Speaker
1
*
Not selectable when "AV Input" is selected as the source.
The REVERSE GEAR SIGNAL lead connection is required ☞ "Installation/Connection Manual." The rear view through
2
*
the camera appears on the monitor in "Full" aspect ratio (regardless of the aspect ratio setting) when you shift the
gear to the reverse (R) position.
3
*
Not selectable when the component connected to the CD changer jack is selected as the source.
4
*
The name of the component detected through the CD changer jack is shown.
The TEL MUTING lead connection is required. ☞ "Installation/Connection Manual."
5
*
6
*
This setting takes effect only when surround is deactivated. (☞ also pages 22 and 23)
7
*
This setting takes effect only when Dual Zone is activated. (☞ also page 26)
Selectable settings, [reference page]
Adjust fader—speaker output balance between the front and rear speakers.
• Upmost—front only
• Downmost—rear only
When using a two-speaker system, set the fader to the center (00).
Adjust balance—speaker output balance between the left and right speakers.
• Leftmost—left only
• Rightmost—right only
Adjust and store auto-adjustment volume level for each source, comparing to
the FM volume level. The volume level will automatically increase or decrease
when you change the source.
–12 to +12; Initial 00
• For digital sources: You can make the adjustments separately depending on
the audio format—Dolby Digital/DTS and the others.
Adjust the subwoofer output level.
–06 to +08; Initial 00
Through: Select when the subwoofer is not connected.
On: Select when the subwoofer is connected.
Adjust the crossover frequency between the front/rear speakers and the
subwoofer.
80Hz, 120Hz, 150Hz
You can change the maximum volume level of this unit.
Off: Deactivates the built-in amplifier.
Low Power: Select this if the maximum power of the speakers is less than
50 W.
High Power
You can activate/deactivate the rear speakers.
Off, On
53
SETTINGS

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kd-adv49

Table of Contents