Using Itunes Tagging; Switching The Media File Type - Pioneer AVH-P6300BT Owner's Manual

Detailed instructions

Using iTunes tagging

This function can be operated with the following
iPod models.
— iPhone 4
— iPod 6th generation
— iPod 5th generation
— iPod nano 6th generation
— iPod nano 5th generation
— iPod nano 4th generation
— iPod nano 3rd generation
— iPod classic
— iPod classic 2nd generation
— iPod touch 4th generation
— iPod touch 3rd generation
— iPod touch 2nd generation
— iPod touch 1st generation
— iPhone
— iPhone 3G
However, tag information can be stored in this
unit even while other iPod models are used.
When you want to use this function in the HD
Radio tuner source, use an HD Radio tuner
(GEX-P20HD).
The song information (tag) can be saved from
the broadcasting station to your iPod. The
songs will show up in a playlist called "Tagged
playlist" in iTunes the next time you sync your
iPod. Then you can directly buy the songs you
want from the iTunes Store.
The tagged songs and the song that you can
buy from the iTunes Store may be different.
Make sure to confirm the song before you
make the purchase.
If you cannot use this function normally, up-
date your iPod firmware.
Storing the tag information to
this unit
1 Tune in to the broadcast station.
2 Store the tag information to this unit.
Refer to Introduction of tuner operations on
page 17.
Refer to Introduction of HD Radioä tuner opera-
tions on page 31.
You can store the information if the TAG indi-
cator is displayed while the desired song is
being broadcast.
# While storing the tag data on this unit, TAG
flashes.
# The tag information for up to 50 songs can be
stored on this unit.
# Depending on the timing of when the tag in-
formation is stored, the tag information for the
song played before or after the currently playing
song may also be stored.
# If an SD is selected as the source while tag in-
formation is being stored to this unit, the tag in-
formation will not be transferred to the iPod.
3 When completed,
off and indicator is displayed.
Storing the tagged information
to your iPod
1 Connect your iPod if it's not connected
to this unit.
When your iPod is connected to this unit, your
iPod starts storing the tagged information
automatically.
# While transferring the tag, you cannot select
the SD source.
2 When completed,
and the tagged information is stored on
your iPod.
# Tag information cannot be transferred to the
iPod when a file on an SD device is being viewed
as a slideshow.

Switching the media file type

When playing a disc containing a mixture of
various media file types, such as DivX and
MP3, you can switch between media file types
to play.
Audio data (CD-DA) and JPEG picture files on
DVD-R/RW/ROM cannot be played back on
this unit.
Section
indicator turns
indicator turns off
33
En
13