Selecting A Preset Channel From The Preset Channel List; Storing Broadcast Frequencies; Storing The Strongest Broadcast Frequencies; Tuning Into Strong Frequencies - Pioneer AVH-4000NEX Owner's Manual

Chapter
06
Selecting a preset channel
from the preset channel list
Once you have stored broadcast channels,
you can easily recall preset channels from
memory with a single touch of a key.
For details, refer to Storing broadcast
frequencies on page 22.
1 Touch the preset channel list dis-
play key.
1
1 Preset channel list display key
2 Touch the item on the list ("1" to
"6") to switch to a channel regis-
tered as a preset channel.
p If you touch the preset channel list
display key while the preset channel list
is displayed, the list disappears and the
preset tuning keys are displayed.

Storing broadcast frequencies

With a touch of any of the preset tuning keys
("1" to "6"), you can easily store up to six
broadcast channels for later recall (also with
the touch of a key).
1 Select a frequency that you want to
store in memory.
2 Touch and hold a preset tuning key
[1] to [6].
The selected radio station is stored in
memory.
The next time you touch the same preset
tuning key "1" to "6", the service component
is recalled from memory.
p Up to 18 FM stations, six for each of the
three FM bands, as well as six AM sta-
tions, can be stored in memory.
22
En
Storing the strongest broad-
cast frequencies
The BSM (best stations memory) function
automatically stores the six strongest broad-
cast frequencies under the preset tuning
keys "1" to "6" and, once stored there, you
can tune into them with the touch of a key.
p Storing broadcast frequencies with BSM
may replace broadcast frequencies you
have already saved.
p Previously stored broadcast frequen-
cies may remain stored if the number of
strong broadcast frequencies stored has
not reached the limit.
1 Touch the preset channel list dis-
play key.
The preset channel list appears.
2 Touch [BSM] to begin a search.
A message appears. While the message
is displayed, the six strongest broadcast
frequencies will be stored under the preset
tuning keys "1" to "6" in the order of their
signal strength. When this is complete, the
message will disappear.
If you touch [Cancel], the storage pro-
cess is canceled.
Tuning into strong
frequencies
p This setting is available only when "HD
Radio" is selected as the source.
Local seek tuning allows you to only tune
into those radio stations with sufficiently
strong signals for good reception.
1 Press the HOME button to display
the Top menu screen.
2 Touch the following keys in the
following order.
The "System" screen appears.
3 Touch [AV Source Settings].
4 Touch [Radio settings].
5 Touch [Local].
The pop-up menu appears.
6 Touch the item you want to set.
FM
Off (default):
Turns the seek tuning setting off.
Level1:
Sets the level of sensitivity for FM to level 1.
Level2:
Sets the level of sensitivity for FM to level 2.
Level3:
Sets the level of sensitivity for FM to level 3.
Level4:
Sets the level of sensitivity for FM to level 4.
AM
Off (default):
Turns the seek tuning setting off.
Level1:
Sets the level of sensitivity for AM to level 1.
Level2:
Sets the level of sensitivity for AM to level 2.
p The FM "Level4" (AM "Level2") setting
allows reception of only stations with the
strongest signals, while lower settings
allow reception of those with weaker
signals.

Switching the seek mode

You can select the method of seek tuning.
1 Press the HOME button to display
the Top menu screen.
2 Touch the following keys in the
following order.
The "System" screen appears.
3 Touch [AV Source Settings].
4 Touch [Radio settings].
5 Touch [Seek] repeatedly until the
desired setting appears.
Seek All (default):
Seeks stations from both analog and
digital broadcasting.
Seek HD:
Only seeks stations from digital
broadcasting.

Switching the reception mode

If reception of a digital broadcast becomes
weak, the tuner automatically switches to
the analog broadcast of the same frequency
level by default. If you want to avoid frequent
automatic switching, change this setting
to "Off".
1 Press the HOME button to display
the Top menu screen.
2 Touch the following keys in the
following order.
The "System" screen appears.
3 Touch [AV Source Settings].
4 Touch [Radio settings].
5 Touch [Blending] repeatedly until
the desired setting appears.
On (default):
Switches to the analog broadcast of the
same frequency automatically.
Off:
Does not switch to the analog broadcast
of the same frequency automatically.
Storing song information to
an iPod (iTunes Tagging)
p For details, refer to Storing song information
to an iPod (iTunes Tagging) on page 62.
Operating with the hardware
buttons
Press the TRK button
You can move the preset channels up or
down.
Press and hold the TRK button
You can perform seek tuning.