318 STARTING AND OPERATING
Number 1 Diesel Fuel Specifications
Fuel Properties - No. 1 - Diesel Reference
Viscosity - 1.3 to 2.4 centistokes (ASTM D-445)
Cetane Number - 40 min.
Sulfur Content - maximum
of.05% by weight
Water & Sediment - less than
0.05 % by volume
Carbon Residue - Less
than.15%
Flash Point - 100°F min.
Density - 40-34 API gravity
Cloud Point - (- 30F°)
Active Sulfur
Copper Strip
Corrosion - #3 rating
(ASTM D613)
(ASTM D-2622)
(ASTM D-2709)
(Ramsbottom ASTM
D-524
(ASTM D-93)
(ASTM D-287)
(ASTM D-97)
(ASTM D-130)
ADDING FUEL — 24–VALVE CUMMINS TURBO
DIESEL
WARNING!
A fire may result if fuel is pumped into a portable
container that is on a truck bed. You could be
burned. Always place fuel containers on the ground
while filling.
NOTE: When a diesel engine is allowed to run out of
fuel, air is pulled into the fuel system.
You may try priming as described below. However, if the
engine will not start, refer to the fuel priming procedure
in the Service Manual or have the vehicle towed to an
authorized Dodge dealer.