Accessing The Dvd Menu; Sectional Repeat Function (A-B); Direct Search - Jensen VM9424 Operating Instructions Manual

VM9424

Accessing the DVD Menu

Press the MENU button (1) on the remote control to recall the main DVD
menu. Use the directional (arrow) buttons on the remote control to select a title
from the menu or touch the title on screen.
For DVD's with more than one title, press the TITLE button (2) on the remote
control to select a different title for playback. Press the OK button (30) on the
remote control to confirm your selection and begin playback. You can also
select a title using the touch screen.

Sectional Repeat Function (A-B)

Use the A-B function to define a specific area of a disc to repeat.
• Press the A
screen) to set the start point (A) of the repeated section.
• Press the A
the repeated section. The selected portion of the DVD will now repeat
continuously.
• Press the A

Direct Search

During DVD or VCD playback, perform the following steps to use the GOTO
feature to access a specific location on a disc:
1. Press the SRCH button (11) on remote control to access the "Search"
screen.
Title
Chapter _ _ _
Time _ _ : _ _ : _ _
2. Use the touch screen or press the
control to select a category.
• Title – Go to specific title
• Chapter – Go to specific chapter
• Time – Go to specific time in current title
NOTE: Only the Track and Time fields are available when searching VCD
discs.
3. Enter a time into the field using the on-screen keypad or the numeric
keypad (31) on the remote control. Press the
4. Press the OK button on screen or on the remote control (30) to go to the
specified location on the disc.
B button (6) on the remote control (or the
B button again once you reach the desired end point (B) of
B button again to cancel the A-B section repeat.
SEARCH
_ _ _
1 3
2
6 7
5
9 0
or buttons (27, 26) on the remote
button to backspace.
25
R
button on
A
4
8
OK