HAMPTON BAY HB1453E Owner's Manual page 16

_O_n the window, Mark a _ineon the center of _e
window stool belb, t_eenthe si_ window stop
moldings,
Loosely attach the sill brack_ to the suppo_
bracke_ using _e carnage _:_itand the I_k nut,
A_aclhthe si_lbracket to the window sill using _e
screws (Type B),,
Carefuliy place the cabinet on the window st_i
and a!ign the center mark on _e bottom kont with
the center line maAed window stool,,
Using
t he M-screw and the lock #ut, a_ach the
suppo_ bracket to _e cabinet track ho_e, Use the first
track hole after the sill bracket on the outer _g,e of
the window sill, Tighten #'_ecarria_ bo_ and the bck
nut, Be _ure the cabinet slants outward
C_inet
Track ho_e
si_
(Type B}
Sill bracket Q
Fig. 2
CAUTION: Do not drill a Ihole in the bosom
_n. 'The unit is d_igned to o_rate witlh Upper
Guide
approximately 1/2" e,l water in bottom pialn.
Pull_e bosom win_aw sash down behind the Top
re_iner bar u_il they meet°
Window s t_l
Fig, 3
: 1, Do not pull _e window sash down so _gihtly
_at the movement of Frame cu_ain is
restqcted,
A_ach the cabinet to S-_e window stool by
driving the screws (Type B) _rough the
cabin_ into window stool
2, The
cabin_ shou!d be installed wi_ a very
slight:tilt _wnward toward the outside.
Cabinet
Frame cudain
Fig. 4