DAELIM S1 - CATALOG Owner's Manual page 43

<REAR WHEEL REMOVAL>
Set vehicle on main stand in upright
position on the ground.
Remove the muffler.
Remove the rear caliper assembly from
the rear swing arm by removing the 2
fixing bolts.
Remove the special bolt of RR.
cushion securing the RR.swing arm
and pull it up.
Lossen the axle nut and remove the
RR.swing arm.
Remove the collar and the rear wheel.
Install in the reverse order of removal.
REAR AXLE NUT TORQUE
: 12.0~13.0kgf m
40
CAUTION
If a torque wrench was not used for
installation, see your authorized
dealer as soon as possible to verify
proper assembly.
Improper assembly may lead to loss
of braking capacity.
Never perform the maintenance of
the muffler right after stopping the
vehicle because the muffler is
extremely hot.