Meter Reading And Usage; Meter; Indicator Lamps; Side Stand Lamp - DAELIM S1 - CATALOG Owner's Manual

METER READING AND USAGE

METER

<SPEEDOMETER>
Indicates driving speed. Maintain legal
speed limits to ensure safe operation.
<ODOMETER>
Indicates total distance in kilometers
travelled by the vehicle.
<FUEL METER>
The fuel meter indicates the gasoline level
inside the fuel tank.
Gasoline should be put in the fuel tank as
soon as possible if the needle is resting in
the red area.
FUEL TANK CAPACITY : 9.6
RESERVIOR CAPACITY : 2.2
10
<FUEL WARNING INDICATOR>
When the fuel is low, the fuel warning
indicator turns on.
When this happens, fill the fuel tank with
the gasoline.
WARNING
To avoid running out of fuel, it might
cause severe injury due to engine
abruptly stop.

INDICATOR LAMPS

<WINKER INDICATOR>
When the winker switch is operated,
the winker indicator flashes in union
with the flashing of the turn signals.
<SIDE STAND LAMP>
When the side-stand is down, the engine
will stop with side-stand lamp on.
MIL MALFUNCTION INDICATION LAMP
<
EMS(Engine Management System)is
equipped with a self-diagnosis function in
order to ensure that the engine control
system is operation normally.
If this function detects a malfunction in the
system, the malfunction indicator lamp
immediately operates.
It gives the rider that malfunction has
occurred in the system.
Normally, the malfunction indicator lamp
illuminates for 3 seconds when the main key is
turned on.
If the malfunction indicator lamp does not
come on under these conditions, the
malfunction indicator lamp may be
defective.
After 3 seconds, the malfunction indicator
lamp off automatically. However, the MIL
blinks continuously, check the EMS
system. If you are not able to check the
EMS system, contact your daelim dealers.
The EMS takes fail-safe function, it enables
to drive only temporary by starting even on
conditioned.
>