Protection; Exit Lamps (Optional) - Dodge 2004 Freightliner Owner's Manual

F r e i g h t l i n e r - a l l . b o o k P a g e 2 4 3 M o n d a y , D e c e m b e r 1 , 2 0 0 3 2 : 5 4 P M
I n t e r i o r L i g h t i n g w i t h I n t e r i o r S e n s o r P r o t e c t i o n
1. Use a screwdriver on the catch spring, remove the
bulb housing.
2. Turn the bulb holder with the bulb in the direction
of the arrow and remove it.
3. Replace the bulb holder and bulb, K – 12V 6W
4. Install the lamp housing.
M A I N T A I N I N G Y O U R V E H I C L E 2 4 3
E x i t L a m p s ( O p t i o n a l )
Lamp housing (1) Cable connector (2) Bulb holder (3)
1. Use a screwdriver on the catch spring to remove the
lamp housing (1).
2. Press the locating spring on the cable connector (2),
hold it down, and remove the cable connector (2).
3. Turn the bulb holder (3) to the left and remove it.
4. Replace the bulb, W5W - 12V 5W.
5. Install the bulb holder (3) and attach the cable
connector (2).
7