TP-Link TL-WR743ND User Manual page 48

TL-WR743ND 150Mbps Wireless AP/Client Router
Figure 4-17 Wireless Settings
SSID - The SSID of the AP your Router is going to connect to as a client. You can also use the
search function to select the SSID to join.
BSSID - The BSSID of the AP your Router is going to connect to as a client.You can also use
the search function to select the BSSID to join.
Search - Click this button, you can search the AP which runs in the current channel.
Key type - This option should be chosen according to the AP's security configuration. It is
recommended that the security type is the same as your AP's security type.
WEP Index - This option should be chosen if the key type is WEP(ASCII) or WEP(HEX). It
indicates the index of the WEP key.
Auth type - This option should be chosen if the key type is WEP(ASCII) or WEP(HEX).It
indicates the authorization type of the Root AP.
Password - If the AP your Router is going to connect needs password, you need to fill the
password in this blank.
Local SSID - Enter a value of up to 32 characters. The same Name (SSID) must be assigned
to all wireless devices in your network.
Enable Wireless Router Radio - The wireless radio of the Router can be enabled or disabled
to allow wireless stations access. If enabled, the wireless stations will be able to access the
Router. Otherwise, wireless stations will not be able to access the Router.
- 41 -