TP-Link TL-WR743ND User Manual page 19

The Router in AP Client Router supports three popular ways to connect to the Internet. Please
select one compatible with your ISP.
2. Click Next to enter the necessary network parameters.
a) If you choose "PPPoE", you will see this page shown in Figure 3-8.
User Name and Password - Enter the User Name and Password provided by your ISP.
These fields are case-sensitive.
b) If you choose "Dynamic IP", the router will automatically receive the IP parameters from your
ISP without needing to enter any parameters.
c) If you Choose "Static IP", the Static IP settings page will appear, shown in
Note:
The IP parameters should have been provided by your ISP.
IP Address - This is the WAN IP address as seen by external users on the Internet (including
your ISP). Enter the IP address into the field.
Subnet Mask - The Subnet Mask is used for the WAN IP address, it is usually
255.255.255.0.
Default Gateway - Enter the gateway IP address into the box if required.
TL-WR743ND 150Mbps Wireless AP/Client Router
Figure 3-8 PPPoE
Figure 3-9 Static IP
- 12 -